• The frame is fabricated from steel pipes.
• The ND models are fitted with an adjustable brake.
• Support by orientables roll bearings.
• The mandrel from steel by 3 inclined plane with expansion range from 470 to 550 mm and hydraulic cylinders which are activated by a electric pump. 
• Brake with pneumatic clamp. 
• Planetary gear-box + trasmission by double or triple chian. 
• Loop control is provided by rolls, photocell and an ultrasound detector for an automatic setup of the decoiler speed. 
• The main shaft is manufactured from steel, rotating on orientable roller bearing and is available in adequate sizes. 
• The ND models are fitted with an adjustable brake. 
• The MD models are fitted with a special reduction unit. 
• Loop control is provided by a timed proximity switch or a photocell. 
• The motor A.C. can be controlled by frequency inverter to obtain acceleration/deceleration ramp with the loop control auto adjusted by ultrasonic detector. 
• The decoilers are available in 8 sizes to suit different material types of medium and large dimensions. 
• The decoiler can operate in both forward and reverse directions. 
• Input power: standard 380V 50Hz 3 electric’s phase. * Smaler models are also available to suit coils weights between 200 and 2000 kg. 
• Optionals are available: snubber roll, variable speed, hydraulic lift loader car.

Coming Soon