4 in 1 Coil Processing Unit

Uncoiler with manual / hydraulic jaw expansion and variable drive & loop control system.
Straightening and feed rolls hardened and hard chrome plated
Roll baskets along with threading table to assist and support the threading of coil material
Hydraulic / pneumatic hold-down, snubber and piller for threading is available on request.
Optional Coil car is available on request.
Coil width guide manual/automatic
Models uptill 1300 mm width and thickness uptill 8 mm is available on request.
Feed Height adjustment is provided.
Coil tip flattener roller is available on request.

Model	C-400	C-600	C-800
Parameters
Width (mm)	400 mm	600 mm	800 mm
Thickness (mm)	0.7 – 4.5 mm	0.8 – 6.0 mm	0.8 – 6.0 mm
Max Coil Weight	3000 Kg	5000 Kg	5000 Kg
Straitening Capacity / Width	4.5 x 200 mm	2.5 x 600 mm	2.5 x 600 mm / 2.0 x 800 mm
	3.0 x 400 mm	6.0 x 300 mm	6.0 x 300 mm
Coil OD	1500 mm	1500 mm	1500 mm
Coil ID	508	508	508
Features	Coil Car, Hydraulic Expansion, Snubber, Piller, Pre-Pinch, Auto Side Guide, Pressure Roller, Hydraulic Power Pack.	Coil Car, Hydraulic Expansion, Snubber, Piller, Pre-Pinch, Auto Side Guide, Pressure Roller, Hydraulic Power Pack.	Coil Car, Hydraulic Expansion, Snubber, Piller, Pre-Pinch, Auto Side Guide, Pressure Roller, Hydraulic Power Pack.
Line Speed (Max)	15	15	15

The above parameters are for the material having tensile strength 40kgf/mm² max.

Models of higher capacity or higher or lower line speeds are available on request.

Technical specifications are indicative and subject to change to suit end application.

Sitemap