SCRAP COILER / WINDER


Scrap Coiler with Winding Arrangement

300 kg Scrap Coiler with Winding Arrangement

Scrap Coiler

Pneumatic Recoiler With Tension Winding

Recoiler With Tension Winding

Recoiler With Tension Winding

SCRAP COILER / TORQUE CONTROLLED WINDER
  • Special Purpose Winding Machine.
  • Centrally Expandable Jaws.
  • All Jaws have fully covered drum for best stability.
  • Pneumatically operated hold-down with potentiometer for speed variation & holding the coil with varying pressure with hand-lever.
  • Mandrel rotating on bearings.
  • Precision Tension Coiler & Winders for Strip Casting & Rolling Mills
  • The Spindle would be driven by D.C. Variable Drive with gear-reducer & brake mechanism. D.C. Drive is in constant tension. Speed reduces automatically with diameter build-up for tight winding.
  • The Control Panel would have following standard parameters : 1. Forward / Reverse Selector     2. Start / Stop Button    3. Emergency Shut Off & Hold-down
  • Speed / Tension Selector.
  • In-built Transformer.
  • Potentiometer to set the Tension manually.
  • Hand-Lever operation for low tension in starting high tension in working.
    • Standard Models for Scrap Coiler for Press Feed Equipment

    Motorised Decoiler ( Standard Models ) (Vertical )
    Model Max. Weight
    kg    		 Max.
    Width
    (mm)    		 JAW
    Expansion
    (mm)    		 Expansion
    Type (mm)    		 OD. Max
    (mm)    		 Power
    (hp)    		 Centre Height from Floor Occup. Area
    (mm)
    L. W. H.
    VD-1(PNE) 100 100 300 to 380 Mech Link Type 800 6 bar 600 850X800X1100
    VD-2 200 150 150 to 350 Mech Screw Type 800 0.5 600 850X800X1100
    VD-5 500 150 300 to 500 Mech Screw Type 1000 0.5 840 1050X950X1400
    VD-10 1000 300 330 to 450 Mech Link Type 1200 0.75 1005 1250X1100X1650
    VD-16 1600 400 330 to 450 Mech Link Type 1500 1 1040 1700X1150X1900
    VD-25 2500 400 420 to 530 Mech Link Type 1500 1.5 1050 1700X1300X1850
    VD-30 3000 600 460 to 560 Mech/Hyd Link Type 1500 3 905 1700X2000X1700
    VD-50 5000 800 460 to 560 Mech/Hyd Link Type 1500 5 980 1700X2500X1700
    VD-50 5000 1300 460 to 520 Mech/Hyd Link Type 1500 5 980 1700X3000X1700
    VD-100 10000 1300 460 to 520 Hyd Link / Wedge Type 1500 7.5 1205 1700X3850X2000
    VD-100 10000 1500 460 to 520 Hyd Link / Wedge Type 1500 7.5 1205 1700X4050X2000

    All above equipments are designed for Line speed of 12-15 Mtrs. Per Minute.

    Models of higher capacity or Higher or Lower Line speeds are available on request.

    Technical specifications are indicative and subject to change to suit end application.

    DOWNLOAD CATALOGUE

    OUR TRUSTED CUSTOMERS